Bentonite-Kormix Plus mixes

Mieszanki bentonitowo-kormixowe

The Bentonite-Kormix Plus mixes are based on hybrid bentonites. The new line of mixes is characterised by a high strength, a high heat resistance, and stable parameters.

The PLUS mix applied in casting facilitates:

  • Increased strength of moulding sands;
  • Stabilised / increased volume of activated clay in the sandmix;
  • Stabilised water demand;
  • Approximately 10% reduction in bentonite/sandmix consumption;
  • Improved quality of casting surfaces (less defects).
Item Parameter 75k 80k 85k
1 Wet compression strength [MPa], min. 0,073 0,075 0,077
2 Spill rate [%], max. 3,0 3,00 3,00
3 Swell factor [cm3/2g] min. 13 15 15
4 Content of lustrous coal carrier [%] min. 25,00 20,00 15,00
5 Loss on ignition, min. [%] (relative to dry sand) 27 – 31 21 – 25 19 – 23
6 Water content [%], max. 8 – 12 8 – 12 8 – 12

Packaging method

42±2,5 kg paper bags, stacked on Euro pallet 1200×800 mm Big Bag, approx. 1000 kg Bulk in truck tanks Other types of packaging to be arranged

Advice

Detailed information can be obtained from our technical consultant:

Damian Drogosz
Implementation and Development Specialist

PHONE: +48 41 2767251
MOBILE: +48 606497245

e-mail: damian.drogosz@zebiec.pl

Sylwia Sieczka
Implementation and Development Specialist

PHONE: +48 41 27 67 321
MOBILE: +48 608 665 346

e-mail: sylwia.sieczka@zebiec.pl